Step 4 – Test and replace the neutral safety switch If the fuse is good, it's time to get your hands dirty. Replacing a blown fuse is just about the easiest DIY job there is. Wouldn't it be really annoying to pay a professional for parts and labor to replace a blown fuse? If the fuse is blown, replace it check the reverse lights and if it blows again, you'll need to start tracing the wires because there's a short somewhere down the line. Step 3 – Open the fuse box and look for the reverse fuseĬhecking for a blown fuse seems quite obvious as well, but if this is the culprit, it's another inexpensive fix that anyone can do. If the socket and wires are good, move on to Step 3. Check the wires for breaks or splits and repair as necessary. If they are bad, snip, splice and apply shrink wrap to restore the connection. Wiggle the wires back and forth to expand any possible cracks. If there is no noticeable corrosion, check the wires behind the socket to make sure there are no cuts or breaks. This should make the connections with the bulb good and is an inexpensive fix. If there is corrosion on the contacts, try using some sandpaper to scrape the corrosion off. Since you already have the bulbs pulled, now is a good time to take a look at the socket. There could be a disconnect between the bulb and the socket. Step 2 – Check the bulb socket for corrosion, dirt or broken wires If the bulbs are brand new or otherwise in good working order, move on to Step 2. As simple as it may be, take the time to double check the filament. It may be quite obvious, but pull the reverse light bulbs and make sure that they are still good.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |